Reflow Soldering Oven/Infrared Reflow Soldering Oven/Reflow Soldering Machine

• Condition: New
• Certification: CCC, ISO, CE
• Warranty: 12 Months
• Automatic Grade: Automatic
• Installation: Vertical
• Number of Heating Zones: Top 8/Bottom 8
• Model NO.: A8
• Heating Passage: 2800mm
• Max. Width of PCB: 400mm
• Mesh Belt Width: 400mm
• Process Height: 880±20mm
• Conveyor Speed: 0-1000mm/Min
• Power Supply: 5 Line 3 Phase 380V 50/60Hz
• Total Consumption: 38kw
• Startup Consumption: 34kw
• Steady Consumption: 4kw
• Ramp up Time: About 20 Mins
• Dimension(L*W*H): 4200×700×1320mm
• Weight: 800kg
• Transport Package: Wooden Pakage
• Specification: 4200*750*1320mm
• Trademark: JAGUAR
• Origin: Shenzhen
• HS Code: 8515190000
• Production Capacity: 25 Sets Per Week

Product Description

Reflow Soldering Machine A8

Introduction:
No.1 The unique advanced long life heating system
1.The heating system adopt the Swedish nickel heater with efficiency and energy-saving. The peak wave length of the radiation power is 4UM with curved surface reflector to the rising temperature speed, improve the thermal efficiency. And the special forced-air circulation system make PCB and the component heated uniform and eliminate the "shadow effect" completely .
2.Using special high temperature resistant protection system in heating preservation system and special iron in furnace .3.Using imported Taiwan SanYue long axis of high temperature fan motor and W shaped heat pipe, Model design, no noise, shockless and easy for maintenance .
4.Whole oven are porous aluminum transfer the hot air to guarantee the hot air evenly to the PCB .the whole top oven fixtures can open completely so that easy to clean the oven inside .
 
No.2 Smooth and reliable transmission system
1.The transmission system use STK adjustable speed motor imported from Taiwan matched with the 1:150 turbine reducer can running smooth ,speed range can be arrived at 0-1000mm/min. 
2. Independent wheel structure support and match stainless belt to make the running smoothly and the speed precision is up to ±20 mm/min .
3.Special stainless belt: durable and wear-resistant, not easy to deform and long life.  

No.3 Stable and reliable electrical control system
1.It adopts imported thermostat control which owns fuzzy control and PID intelligent precision control system.It can fast response the changes in external heat and ensure more temperature balanced by PID intelligent operation and automatic control heating .
2. Using thermocouple imported from Taiwan by each temperature zone, it can fast and sensitive induct the changes in each temperature zone, transfer and control timely, compensate the temperature balance in each zone .
3 .Special SSR solid state relay matched with dedicated radiator improve the heat efficiency greatly and prolong the lifetime effectively. No contact output and fuzzy control function by thermostat, can monitoring the changes of outside temperature and calorific value, controlling the heating device by minimum pulse, ensuring the high precision of the temperature control & the uniform temperature in internal and the length ,direction, temperature distribution, all of these meet IPC standards .
4. Power is abundant, heat up fast, it's only need 20 minutes from room temperature to constant temperature.
5 .Failure diagnosis and sound light alarm.
6.Delay shutdown production function, uniform cooling after the shutdown: prevent component deformation.


Specification:

Model	JAGUAR A8
Heating System	Number of heating zones	UP 8/BOTTOM 8
	Length of heating zones	2800MM
	Heating mode	Up:hot air; bottom: IR
	Cooling Mode	Force air
Conveyor System	Max. Width of PCB	350mm
	Mesh belt width	400mm
	Transmission Direction	L→R(or R→L)
	Transmission Net Height	880±20mm
	Transmission type	Mesh
	Conveyor speed	0-1000mm/min
	Fixed rail side	Front rail fixed(option: rear rail fixed)
Control system	Power supply	5 line 3 phase 380V 50/60Hz
	Total power	38kw
	Starting power	34kw
	Normal power consumption	4KW
	Warming time	About 20 mins
	Temp. setting range	Room temperature-300ºC
	Temp. control method	PID close loop control & SSR driving
	Temp. control precision	±1ºC
	Temp. deviation on PCB	±2ºC
	Data storage	Process Data and status storage(80GB)(machine with PC)
	Nozzle plate	Aluminum Alloy Plate
	Abnormal Alarm	Abnormal temp. (extra-high/extra-low temp.)
	Board dropped alarm	Tower light:Yellow-warming, Green-normal, Red-abnormal
General	Dimension(L*W*H)	4200×700×1320mm
	Weight	800KG
	Color	Computer gray

FAQ:

 1) This is the first time I use this kind of machine, is it easy to operate?

 There is english manual or guide video that show you how to use machine.

  If you still have any question, please contact us by e-mail / skype/ phone /trademanager online service.

 2) If machine have any problem after I receive it, how can I do ?

 Free parts send to you in machine warranty period.

If the part is less than 0.5KG, we pay the postage.

  If it exceeds 0.5KG, you need to pay the postage.

 3) MOQ ?

 1 set machine, mixed order is also welcomed.

 4) How can I buy this machine from you? ( Very easy and flexible !)

  A. Consult us about this product on line or by e-mail.

 B. Negotiate and confirm the final price , shipping , payment methods and other terms.

 C. Send you the proforma invoice and confirm your order.

 D. Make the payment according to the method put on proforma invoice.

 E. We prepare for your order in terms of the proforma invoice after confirming your full payment.

 And 100% quality check before shipping.

 F.Send your order by air or by sea.

 5)Why choose us ?

 A. Gold supplier on MIC !

 B. Trade assurance to US$54,000 !

 C. Best price & Best shipping & Best service !


Contact Info:
Shenzhen Jaguar Automation Equipment Co.,Ltd.
Global Power SMT Equipment Leader
Add:14th Building,West of Furong Industrial park,Shajing town,Bao.an District,Shenzhen,Guangdong,China
Web:jaguarsmt.en.made-in-china.com
        jaguarsmt.en.made-in-china.com