Jaguar 8 Head Chip Mounter Machine for Electronics Mass Production

• Customization: Available
• After-sales Service: 1 Year
• Condition: New
• Model NO.: Jaguar A8L
• Certification: CCC, ISO, CE
• Warranty: 12 Months
• Automatic Grade: Automatic
• Installation: Vertical
• Driven Type: Electric
• Placement Speed: 35000cph
• Place Accuracy: ±0.05mm
• Dimension of PCB: 60X60-1200X350mm
• The Thickness of PCB: 1-4mm
• Feeder Lanes: 30
• Mounting Head Number: 10
• The Range of Components: 0603/0402~20×20mm IC
• Position Way: Image Recognition + Algorithm Compensation
• Electronic Parameter: Single -Phase 220V AC 50Hz2.5kVA
• Air Source Requirement: Dry Air 0.45MPa~0.6MPa 50L/Min
• Transport Package: Wooden Case
• Specification: CE
• Trademark: Jaguar
• Origin: Shenzhen, China
• HS Code: 8479896200
• Production Capacity: 100PCS/Month
• Package Size: 170.00cm * 148.00cm * 151.00cm
• Package Gross Weight: 600.000kg

Product Description

JAGUAR-A8L Automatic SMT P&P Machine

JAGUAR-A8L is an automatic high speed pick and place machine, equiped 8 heads, widely applicable components, it's precision meets 0402 components, it's a high performance and ecnomic pick and place machine.

Specification:

Feeder No.	70 (Front 38, rear 32)	IC Tray No.	Support 12 sets
Mounting Heads	8	XYZ Drive Guide Rail	TBI High-precision heavy-duty straight-line guide rail
Average Power	750W
Positioning Accuracy	0.01mm	Motion Drive System	Panasonic High speed DPS driver
Nozzle Buffering Range	5.0mm	Operating System	Independent development based on Windows operating system, support Windows XP, Win7
Weight	550KGS
Power Supply	220V, 50Hz	Component Angle	0~360°, synchronized rotation in motion
Compressed Air	0.5-06Mpa	X/Y Running Mode	Intelligent curve acceleration and deceleration linear linkage
Driving Motor	Panasonic servo motor
Rail Guide Adjustment Mode	Manual + Automatic	Alarm when open covers	deceleration or stop
Mounting optimization	Program automation, continue production after mounting completed, no need to wait for resetting	X/Y Transmission Mode	Imported TBI high-precision ball screw rod + imported TBI heavy-duty linear guide
Nozzle Vacuum Source	High-efficiency & energy-saving vacuum pump and vacuum tank	Mounting Mode	Manual. Semi-automatic, Automatic
		Operating Window	Dual displays operation front and rear, more humane design
Convenient Button	Offline, reset, automatic operation, clear alarm	Automated connection	Can automatically connect signal equipment at both end
Max. Circuit Board Area	650x380mm	Board Input Method	Three-stage transmitting boards-automatic connection from left to right, automatic PCB transmission positioning
XY Max. Movement Range	750x670mm
Z Axis Max. Movement Range	20mm	Visual Display	2pcs of 17" industrial control display ratio 4:3, resolution 1280X1024
Belt Type Feeder	8/12/16/24/32mm feeders, vibration feeder	Programming Mode	Point-to-point programming, visual programming, PCB file coordinates inputting, etc.
Max. Mounting Speed	15000CPH
Average Mounting Speed	12000CPH (Visual)	Recognition Camera No.	1 Mark recognition camera, 8 high speed recognition camera, 1 high-precision 8 million pixel recognition camera
Dimensions	1500x1280x1410mm
Applicable Mounting Range: Suitable for 0201, 0402, 0603, 0805, 1206, LED lamp beads, diodes, transistors, SOT, 45mm*45mm range pin pitch ≥0.3mm QFP, BGA etc.

Advantages:
1. Total 10pcs of cameras: 1PC of Mark recognition camera, 8pcs of high speed recognition camera, 1PC of 8 million pixel high-precision recognition camera, synchronously recognize, effectively ensure mounting speed and precision. What's more, precision camera redesigned as the postposition structure, more place to hold feeders for the front part, improve the efficiency of placement.
2. Adopt imported JUKI nozzle spring buffer, not easy to drop components when picking and placement, convenient to install and durable. Up to 4.groups of components can be picked up at the same time, which improves the picking up speed and work efficiency of the machine.
3. XY drives adopt imported TBI high precision lapping ball screw + heavy-load linear guide, fast positioning, low noise and high precision. Precision control error can reach 0.018mm..
4. Adopt Japan Panasonic A6 series AC servo motor, the encoder with 23Bit precision, 8 times higher than A5 series.
5. With two 17" displays, could operate front and rear simultaneously, making the operation easier, saving operators' time, no need to run around the machine.
6. 3-section automatic inputting board mode: board waiting mounting, board mounting, and board waiting outputting, which greatly reduces the transmission distance and increase the number of board. Save much time, and improve the efficiency.
7. Change the traditional way of positive pressure turning into negative pressure to pick up components, built-in high-efficiency & energy-saving vacuum pump and vacuum tank, equipped with the latest r&d vacuum damage system. Greatly improve the efficiency of picking up the components, eliminate the noise caused by positive pressure turning into negative pressure, delay and reduce the frequency of air compressor start-up, effectively improve the life of air compressor.
8. Can hold 70pcs of 8mm pneumatic feeders simultaneously, reserved 38 electric feeder interface, could switch feeder type at random, also could be electric, pneumatic feeder mixture. Accurately mount 0201-5050 resistance, LED lamp beads, diodes, transistor, SOP, chip QFP-256, 45mm*45mm range QFP, BGA etc.
9. Conveyor's width adjustment adopts bilateral transmission structure to improve the width modulation accuracy and stability, effectively avoiding the different width of both ends after adjusting.


About Us:
Shenzhen Jaguar Automation Equipment Co., Ltd. is a professional Reflow Oven and Wave Soldering Manufacturer in Shenzhen, China. We focus on SMT and THT Soldering technology for more than 10 years, and our engineers have more than 20 years experience.
We are certified National High-tech Enterprise since 2017, integrated R&D, manufacture, service, trade, all our products have CE certification, our products are widely recognized at our domestic market as well as oversea market.
Our goal is to provide customers with the best service possible and to produce excellent quality products that will meet or exceed your expectations.


Our Factory:
More than 6000 square meters production plant.
More than 20 years experience in SMT automation equipment manufacturing. More than 50 peoples production team, among them
36 mechanical assembly technicians
12 electrical engineers
4 professional QC


Successful Experience:
JAGUAR's customer in 35 countries around the world
1. We have been helping customers to build a lot of new factories around the world.
2. Training more than 600 experts and technician for customers.
3. Became the most reliable Chinese partner for you.

Customer and Feedback: 


Exhibitions:
Keep attending more than 10 exhibitions and forums each year.
The annual NEPCON and Electronica exhibitions are our regular event.
Participate in 3-5 overseas famous exhibitions regularly every year, like:
IPC Expo in San Diego, US
Electronica in Delhi, India 
Electron Tech Expo in Mosco, Russia
WIN Exhibition in Istanbul, Turkey

Our Certificates:
We passed ISO certifications
We are IPC member company
We are National High-tech Enterprise
All the machines have CE and ROHS certifications

Packing and shipping:

What we can do for you?
1.  We provide full SMT and THT solution for you
2.  We provide core technology with our equipments
3.  We provide the most professional tech service
4.  We have wealthy experience on SMT and THT factory setup
5.  We can solve any question about SMT and THT