Jaguar Vacuum Reflow Oven with High Quantity

• After-sales Service: Online Servese
• Condition: New
• Certification: CE
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: V43
• Warranty: 12 Months
• Automatic Grade: Automatic
• The Drawer Bearing Weight: 5kg
• Power: Max:21.5kw, Working Power:8-10kw
• Vacuum Degree: Below 10PA
• Oven Chamber Height: 100mm
• Transport Package: Vacuum
• Specification: 1400 x 800 x 1300 mm
• Trademark: Jaguar
• Origin: Shenzhen
• Production Capacity: 10 Set/Month
• Package Size: 140.00cm * 80.00cm * 130.00cm
• Package Gross Weight: 260.000kg

Product Description

 

Product Description

Vacuum welding oven JaguarV43

The pictures are for reference only: subject to the actual and technical configuration requirements.
1,Observation system: the cavity has a visual window to observe the welding process in real time
2,Heating system:applicable to IGBT modular,high power device, LED observation system, Chamber with visual window, can observe soldering process, Sintering and welding of encapsulated semiconductor devices, top output power is set according to different product requirements.
3,Up and bottom heating system, configure electric current regulator, can do high precision dynamic temperature control and ensure temp. uniformity of bearing platform
4,Vacuum system:machine configure DC high speed rotary vane vacuum pump, can rapid realize oven chamber's vacuum environment to 0.1mbar, the highest vacuum degree to 0.1mbar
5,Cooling system:machine adopt water cooling system, to ensure rapid cooling under high temperature vacuum environment
6,Software:programmable warming control, can set the up down temp. profile according to process, each profile automatic generated, editable, modifiable and storable.
7,Control system:software modular design, process profile, vacuum extraction, atmosphere and cooling all can set independently, can combine the production process to achieve a key operation
8,Atmosphere system: machine realize no flux soldering, can recharge H2, N2/H2 mixed atmosphere, HCOOH, N2 reduce and protected air, to ensure no cavity in solder joint(H2, N2/H2 mixed atmosphere is optional)
9,Data record system: with uninterrupted real-time monitoring and data record system, software curve record temperature control curve save process parameters save equipment parameters record call
10,Multi-process atmosphere:N2,N2/H2,pure H2,HCOOH(N2 carrier gas),ArH2 plasma assisted process;(N2 and N2/H2 gas process optional)
11,Cold wall heating design, low heat capacity heating plate with optical coating, array infrared heating quartz lamp and N2 air cooling nozzle, built-in temperature measuring thermocouple, forming fast and accurate automatic temperature control capability
12,Heating plate layer bearing, single layer bearing 5 kg
13,Rapid cooling speed: separate water cooling and gas cooling devices are installed in the cavity to realize rapid cooling of the welded devices
14,Low void rate welding quality: ensure that after welding, the large area of the pad to achieve a void rate of less than 3%
15,It can meet the high temperature welding requirements of materials such as lead-free solder paste and high quality welding requirements of solder paste vacuum environment
16,Flux recycle system, under the condition of stable vacuum in the production process, complete flux recovery, reduce the contamination of products inside the equipment
17. Visual monitoring analysis system (optional) : first, vacuum welding field for product welding process for real-time recording, vacuum synchronous recording temperature and the temperature curve, automatically save the video file, independently, the melting point of solder and state were analyzed, and facilitate product process adjustment, shorten the research and development testing cycle, intuitive and convenient to find process adjustment.

Product Parameters

Technical parameters:

JB-V43 Technical Specifications
Basic Parameter Basic Parameter	Dimension	1400 x 800 x 1300 mm (LxWxH)
	Weight	About 260 kg
	Vacuum degree	Below 10Pa
	Effective welding area	400 mm x 300mm
	Oven chamber height	100mm
	Temp. range	Max to 450°C
	Table warming speed rate	Max 2ºC/S
	Cooling speed rate	Max 2ºC/S
	Heating rate	Max to 120°C /min
	Cooling rate	120ºC/min (The cabin is equipped with integral cooling water circulation)
	Transverse temperature difference	±1%
	The drawer bearing weight	5kg
	Power	Max:21.5kw, Working power:8-10kw
	Heating table	Copper with special treatment
	Power supply	380V, 50HZ/60HZ
	Electric current	max. 3 x20 A, 50-60 HZ
	Gas	Nitrogen system
	Formic acid gas	Formic acid reducing atmosphere (optional)
	Visual monitoring system	Observe the melting state of solder in the welding process in real time, and record, so as to facilitate the analysis of solder and material; (optional)
Control Parameter	Control mode	Siemens PLC + Touch screen
	Monitor window	With 1 monitor window
	Temp. Profile setting	Temp +Time (can set temp, time and temp warming ramp rate)(the most can set 150 process stages)
	Interface	COM
Security System	Oven chamber temp. extra-high alarm, over degree of process warming alarm
	Cooling water pressure detection system, low pressure alarm, software prompt
	Air pressure detection system, high and low pressure alarm, software prompt
	The door is not in place for inspection and protection
	Separate electrical components from water - cooled components
	Cooling water pressure detection system, low pressure alarm, software prompt
	One key to cut off part of the heating power

List of configuration:

Item	Description	Specifications	Quantity	Remark
1	Main Machine	JB-V43	1set
2	Software	V1.1	1set	Upgrade for free all time
3	Control System	JAGUAR standard	1set	PLC(SIEMENS)+ IPC(Advantech)
4	WatWater Cooling System	JAGUAR standard	1set	Hardware equipment
5	Mechanical Vacuum Pump System	AVR-30	1set
6	Nitrogen Control System	JAGUAR standard	1set	Standard configure nitrogen control system
7	Vacuum Parts, Tool and Heating Tube	JAGUAR standard	1set

Company Profile

Shenzhen Jaguar Automation Equipment Co., Ltd is professional in manufacturing wave soldering machine and reflow oven,besides both two kinds of products, we also engaged in offering SMT conveyor, pick and place machine, LED equipments, PCB loader and unloader, screen printer and other SMT machines.Our services, we devote to serve customers and meet all of their diversified requirments with stable technical level, innovative design concept, precise manufacturing process, reasonable price and customer first after-sales system.JAGUAR has been committed to develop to lead-free machine and manufacture lead-free electronic devices since foundation. At present, we have researched and developed 4 sorts of environmental friendly reflow oven, there are A series, M series, F series and R series. What's more, we have also develop wave soldering machine, for example, the econimic wave solder, top lead free wave solder and high-end of large size wave solder. All of our machines are not only used wildly in electronic circuit, LED industry, instruments and apparatuses, but also in household appliances, such as washing machine, microwave, television ect.

Our Factory:

More than 6000 square meters production plant.
More than 20 years experience in SMT automation equipment manufacturing. More than 50 peoples production team, among them
36 mechanical assembly technicians
12 electrical engineers
4 professional QC

Successful Experience:

JAGUAR's customer in 35 countries around the world
1. We have been helping customers to build a lot of new factories around the world.
2. Training more than 600 experts and technician for customers.
3. Became the most reliable Chinese partner for you.

Customer and Feedback: 

Exhibitions:

Keep attending more than 10 exhibitions and forums each year.
The annual NEPCON and Electronica exhibitions are our regular event.
Participate in 3-5 overseas famous exhibitions regularly every year, like:
IPC Expo in San Diego, US
Electronica in Delhi, India 
Electron Tech Expo in Mosco, Russia
WIN Exhibition in Istanbul, Turkey
Our Certificates:

We passed ISO certifications
We are IPC member company
We are National High-tech Enterprise
All the machines have CE and ROHS certifications

Packing and shipping:

What we can do for you?
1.  We provide full SMT and THT solution for you
2.  We provide core technology with our equipments
3.  We provide the most professional tech service
4.  We have wealthy experience on SMT and THT factory setup
5.  We can solve any question about SMT and THT

 

 
JAGUAR AUTOMATION

Add.:14th Building,Furong Industrial Zone,Xinqiao Street, Bao'an District, Shenzhen,China